The oscillator we tested before we needed it
The CEM3340 is one of the few chips that hold a complete oscillator: on its own it makes the sawtooth and derives a triangle and a pulse. You’ll find it in plenty of famous eighties instruments. When we first tried it, none of our instruments used it. We tried it anyway.
What you would hear
The sawtooth first, so you don’t expect the wrong thing. In our model the wave restarts on every cycle so fast that its sawtooth is, in practice, the one our engine already made: harmonic by harmonic, the difference is far too small to hear. If you hoped the 3340 would change the sawtooth, here it doesn’t.
The character is in three other places:
- Tuning. As the frequency rises, the chip drifts away from the right note, and two close oscillators beat against each other, the slow pulsing of two almost identical notes. Tuning has three modes: perfect (the default: the note you ask for is the note you get), trimmed, or untrimmed. Untrimmed, the top of the range goes clearly flat; trimmed, it ends up slightly sharp.
- Pulse width. Sweep the width of the pulse all the way down and the chip’s pulse never fully disappears, where an ideal one switches off.
- The circuit around it. An option that adds the circuit around the chip.
How we know
We tested it offline, without producing any sound: the model is built from the manufacturer’s datasheet and compared with the numbers physics gives. That is why, when the chip goes into an instrument, the question of whether it is right already has an answer, and we get straight to making it sound good. We did the same with the filter, envelope and amplifier chips of the same family. Since then the oscillator has made it into Line101, Obelyx8 and Memo18, already checked.