Skip to content
IkonaBIT Instruments written by musicians, for musicians. Sign in

Line101 2026 · W37 2 min

Two amplifiers, two laws

What gives an amplifier its character? The usual answer is a chip name. Our models point somewhere more useful: most of the character is in the LAW, the way the control signal, an envelope for example, turns into volume. How the amplifier colours the sound when you push it matters too, but less.

Two ways to colour a sound

When an amplifier is pushed, it adds extra notes on top of yours, called harmonics, and they come in two families. The odd ones are traditionally described as tightening a sound, the even ones as thickening it.

Line101’s amplifier is modelled on a custom chip for which we know of no public datasheet. At the default settings and normal level, the colour in our model is mostly odd: in the ideal case the stage is perfectly symmetric, and a symmetric stage makes only odd harmonics. The input offset, a small imbalance, breaks that symmetry and lets the even ones in: they grow with it and, when the offset is wide, overtake the odd ones. On Line101, AGE is the control that widens it: turn it up and the even ones step forward.

The American amplifier we also model, built on the CEM3360, gets the opposite colour: even harmonics first. The datasheet gives the total distortion but not which family it belongs to, so that is a choice made from the circuit’s design, not a measurement. Same job in the circuit, opposite colour.

The curve matters even more

Then there is the control law, linear or exponential, and it is anything but a detail: it decides how an envelope turns into loudness. Halfway through its travel, the linear law sits 6 dB below the maximum; an exponential law spread over 80 dB is already 40 dB down. Same envelope, two different volume curves.

Imagine two instruments with the same oscillator, the same filter and the same envelope. If their amplifiers obey different laws, they can end up sounding quite different: in our models, the choice of law moved the result far more than the chip’s own quirks. That is why every amplifier model we build declares its law, and none of them has a warm switch. There is nothing to warm up: there is a curve, and it is either the circuit’s or a different one.

Hear how Line101 sounds