Skip to content
IkonaBIT Instruments written by musicians, for musicians. Sign in

Polyphonic synthesizer - 8 voices

Obelyx8

Obelyx8

Each voice is a chain of two oscillators, a resistor-network mixer, a two- or four-pole filter and an amplifier. Above the voices - note assignment, LFO, arpeggiator, split, quantised controls - the model is just as careful, because in an instrument of this family half the character lives there. Controls do not reach a voice as a continuous signal: they are updated at 100 Hz and held in between, and pitch moves in 192 steps to the octave.

VST3 + Standalone v0.1.0 Windows 64-bit

Obelyx8
The panel being played: an arpeggio on the keyboard while the filter frequency sweeps and RESONANCE and MODULATION breathe. The knobs and key lamps follow.

Coming soon

Not in the shop yet.

VST3 + Standalone v0.1.0 Windows 64-bit

One licence covers both formats. 12 months of updates from purchase; the plugin keeps working afterwards.

Half the machine is what sits above the voices.

Note rotation, a single noise source, two independent modulation buses, controls that move in steps. None of it is simplified away.

How the sound is made

Quantised control, eight unequal voices, one shared noise.

Three things a generic subtractive synth smooths over, and this one keeps.

Control that moves in steps

Control numbers are held between updates. Pitch has 192 steps per octave: one step is 6.25 cent, and a movement below half a step moves nothing. It is the grain with which pitch moves, not an approximation to hide.

Eight voices that are not equal

Each voice has its own volume, its own detuning and its own random pitch wobble (about 13 cent rms in the model). Assignment is a pure rotation 1 to 8 that advances even when the voice it lands on is busy, so the ninth note steals one - and playing the same chord twice usually lands on other voices.

One noise source for everything

Noise enters every voice from the same source, so in a chord it adds in phase and grows with the number of notes instead of their square root: with two voices the bench measures +5.95 dB, where two independent noises would give 3.01 dB.

What it is for

Three things it does that a generic polysynth will not.

Not a list of features: three consequences of how the instrument is built.

Chords that do not come out quite the same twice

Voice tolerances, a random pitch wobble and a rotating assignment mean two plays of the same chord usually land on different voices and come out a little different.

Modulation you can aim

Two independent buses, each with its own depth, delay, attack, quantisation and inversion: pitch on one, volume on the other, and neither touches the other.

A keyboard that really splits

SPLIT and DOUBLE work with two real programs, not two zones with the same sound. The lower program is chosen with LOWER: in SPLIT it plays the lower half of the keyboard, in DOUBLE the two programs share the voices across the whole keyboard.

Filter and envelopes

Two or four poles, and a resonance the circuit limits.

A 4.5 octaves cutoff knob in 64 positions, optional keyboard tracking, and a filter envelope that adds up to 8 octaves when MOD is fully open. Four poles give 24 dB per octave, two poles a resonant 12 dB per octave.

  • The resonance has 64 positions and at full RES the filter does not self-oscillate. Checked with one note and one cutoff setting, by releasing the note and looking at what is left four seconds later: -88 dB at two poles, -99 dB at four. The top of the range is a tuned value, not a measured figure of the chip.
  • Envelope times are anchored, not chosen: the time constant runs from 1.128 ms to 11.28 s, exactly four decades, and every knob step multiplies the time by the same ratio.
  • A sustain pedal (CC 64) takes the release to the value set on PAGE 2, and the note stays alive while the pedal is down.
Two or four poles, and a resonance the circuit limits.

Modulation

Two buses, not one depth with six destinations.

One LFO for the whole instrument, 0.067 - 50 Hz, with seven waveforms from the panel. It feeds two independent buses with their own depth:

  • Bus 1: frequency of OSC 1, frequency of OSC 2, frequency of the filter. Bus 2: pulse width of OSC 1, pulse width of OSC 2, volume.
  • Each bus has delay and attack from 0 to 3.5 s, a quantisation that turns the sweep into steps and an INVERT that reverses the envelope: the modulation starts at zero and rises, or starts full and falls.
  • A second LFO, on the modulation panel, is a performance vibrato: it acts on pitch only, where the two destination keys send it, and adds to the lever and to the mod wheel.
Two buses, not one depth with six destinations.

Oscillators and mixer

A mixer that is a network, not a sum.

Two oscillators per voice, each with saw, pulse or - with neither on - triangle, plus sync and the filter envelope on OSC 2. The seven sources load one another: the saw of OSC 1 drops 0.30 dB when the pulse is switched on too, and lowering OSC 2 by 13.5 dB also lowers OSC 1 by 2.1 dB. A table of fixed gains does not reproduce that, which is why switching everything on does not sound like the sum of the single sounds.

A mixer that is a network, not a sum.

The second face

PAGE 2: every control has a second function.

Knobs and keys carry their function in white and, with PAGE 2 on, many of them the one printed underneath in blue: modulation delay and attack, quantisation, LFO phase, the six portamento modes, voice enables, the bank file. It is an instrument you can program deeply without a single menu.

  • Portamento is linear in time, 0 to 10 s, with six combinable variants: MATCH, QUANTIZE, BEND, LEGATO, EQUAL TIME, EXPONENTIAL.
  • WRITE stores the panel into the current program; the written version wins over the factory one, travels with the plug-in state and is marked with an asterisk in the list.
PAGE 2: every control has a second function.

What is measured

Every stage against the value it should have.

The bench checks each stage against an expectation recomputed from the topology: LFO, envelopes, mixer, voice, assignment, control grid, resonance, PAGE 2. Where a value does not follow from a calculation on the circuit it is tuned and declared as such in the code.

68circuit tests, all inside their window
113golden audio comparisons, none out
13plug-in shell checks, all passing
22modulation checks on rendered audio, all passing

Version 0.1.0 is an honest early release: the bank has 120 positions but 104 distinct programs, because 16 positions are still placeholders to be filled, and there are no factory programs dedicated to SPLIT and DOUBLE yet - both modes work with any pair of the existing programs.

Specifications

TypeAnalogue-modelled polyphonic synthesizer, circuit level; one output, copied to both channels
Voices8, assigned in rotation; Unison puts all eight on one note
Oscillators16: two per voice, saw, pulse and triangle, sync, filter envelope on OSC 2
MixerResistor network solved as a network; one pink noise source for the whole instrument
FilterLow-pass, four poles (24 dB/oct) or two poles (12 dB/oct), keyboard tracking, no self-oscillation
EnvelopesTwo, filter and volume, ADSR with 64 positions per stage, 1.1 ms - 11.3 s
LFOTwo: the program LFO and the modulation-panel LFO, 0.067 - 50 Hz; two independent modulation buses
Keyboard61 keys; whole, SPLIT or DOUBLE; HOLD, CHORD, transpose of one octave; two-axis lever
ArpeggiatorThree modes, a transposition cycle of 0 to 5 octaves, fixed step of 0.2318 s
Programs104 distinct programs in 120 positions (groups A to D combinable); WRITE per program
Parameters80 exposed to the host
Latency0 samples; tail of 10 s declared to the host
FormatsVST3 and standalone application, Windows 64-bit; version 0.1.0

In one line

Eight voices, and the part above them.

8 voices, 16 oscillators, 104 distinct programs in 120 positions, 80 parameters for the host, zero samples of latency. The arpeggiator, split, hold and the lever are played, not automated: they belong to the instrument, not to the project.

The other instruments

Downloads

Try Obelyx8

Obelyx8

Obelyx8

The eight-voice polysynth, modelled at circuit level

Each voice is a chain of two oscillators, a resistor-network mixer, a two- or four-pole filter and an amplifier. Above the voices - note assignment, LFO, arpeggiator, split, quantised controls - the model is just as careful, because in an instrument of this family half the character lives there. Controls do not reach a voice as a continuous signal: they are updated at 100 Hz and held in between, and pitch moves in 192 steps to the octave.

Read about this instrument

No release for this instrument yet.

All installers