Skip to content
IkonaBIT Instruments written by musicians, for musicians. Sign in

Monophonic analogue synthesizer

Line101

Line101

Not a row of blocks with the right names on them. The oscillator has its dead time, the filter keeps its bass under resonance, the amplifier compresses and thumps: behaviours that are inconvenient on paper, and the reason the instrument is recognised in two notes.

v1.0.0

Available forVST3 · Standalone
Line101
One oscillator, 3 sub-oscillator modes, and noise with a corner.

betadownload and try

Download the betaSign up

Perpetual licence · 12 months of updates · full trial before you buy

In beta, and you try all of it

This is not a cut-down version: it is the complete instrument. We are asking you to use it and tell us what does not add up.

— 10 clean minutes at every launch — then 3 seconds of noise every 3 minutes — nothing disabled, no preset locked; offline renders (bounce, export, freeze) are always degraded — beta and stable builds follow the same rule

3 seconds at −18 dBFS · the clock restarts at every launch

v1.0.0

Available forVST3 · Standalone

One licence covers both formats. 12 months of updates from purchase; the instrument keeps working afterwards.

The amplifier compresses oddly - and that is the whole point.

Its distortion is odd-order and its control law is linear, and it has an offset that produces the thump at note-on. Both are part of the behaviour of the stage. Removing them would make a cleaner instrument and a less recognisable one.

The voice

One oscillator, 3 sub-oscillator modes, and noise with a corner.

Saw, variable-width pulse, sub and noise, all summed together in a mixer with a fader each - the source section of a monophonic synth, where you build the raw material before shaping it.

The oscillator

A single voltage-controlled oscillator with saw and pulse from the same core, with the dead time and scale error of an analogue oscillator rather than the perfect response of a band-limited generator.

The divider

The sub comes from a divider: one octave down as a square, two octaves down as a square, or two octaves down as a pulse at a quarter width. Three characters, not one level.

Noise with a pole

The noise is not white: the stage that amplifies it has a corner at 3 kHz, and that corner is in the model. It is why the noise sits where it sits.

Who it is for

For basses, leads, and sequences that run on their own.

A monophonic synth with a sequencer built in is not a smaller polysynth. It is an instrument for one line at a time, played hard.

Bass and lead

The four-pole filter reaches self-oscillation, and the amplifier adds its own compression on the way out - the sound is loud before you make it loud.

Sequenced music

100 steps across 2 banks, with rests and ties, transposed live from the keyboard. The sequence is part of the patch.

Anyone who wants it polyphonic

A poly mode of 8 voices lives in the drawer - the same voice, 8 times, when the part needs chords.

The filter

4 poles, 24 dB/oct, up to self-oscillation.

A four-pole low-pass with resonance up to self-oscillation, and bass that does not thin out as the resonance rises. What matters most is at the extremes: what it does at full resonance, how it behaves when driven, and how the resonance interacts with the source level.

  • Frequency, resonance, envelope amount, modulation and key-follow
  • Self-oscillation, so the filter is also a sine source
  • One envelope, shared by filter and amplifier, that behaves like a capacitor: the decay aims at the sustain, the release starts from the instantaneous level
4 poles, 24 dB/oct, up to self-oscillation.

Sequencer and arpeggiator

100 steps, 2 banks, and the clock is the LFO.

The sequencer and the arpeggiator both run from the low-frequency oscillator, which is why changing the modulation rate changes the tempo of the pattern. Rests and ties are steps like any other.

  • 100 steps over 2 banks, with rests and ties
  • Live transposition from the keyboard
  • Arpeggiator: up, up and down, down, with hold
100 steps, 2 banks, and the clock is the LFO.

The source mixer

Four sources, four faders, summed before the filter.

Saw, pulse, sub and noise each have their own level, and they are summed before the filter rather than switched. That is what lets a bass carry a sub underneath a bright pulse, and what makes the noise part of the timbre rather than an effect on top of it.

Four sources, four faders, summed before the filter.

In numbers

101 parameters, and a patch that carries its own sequence.

The stages are specified by their behaviour - the noise corner at 3 kHz, the 24 dB/oct slope, the odd-order compression of the amplifier, the envelope that decays towards the sustain - and each can be heard and measured on the instrument itself.

101parameters exposed to automation
100factory patches, all rewritable
100sequencer steps, part of the patch
24 dB/octfilter slope, to self-oscillation

The sequence travels inside the patch rather than beside it: recalling a sound recalls the line that goes with it. On an instrument built around a sequencer, separating the two would mean the patch is only half the idea.

Line101
The oscillator: range, pulse width and modulation.
Line101
The envelope, shared by filter and amplifier.
Line101
The drawer: poly mode, effects and the settings the panel does not carry.
Line101
The standalone application.

Specifications

TypeMonophonic subtractive analogue synthesizer, 1 voice (8-voice poly mode in the drawer)
Oscillator1 voltage-controlled oscillator: saw, variable-width pulse, sub and noise, summed together
Sub-oscillatorDivider, 3 modes: one octave down square, two octaves down square, two octaves down pulse at a quarter width
NoiseNot white: the 3 kHz corner of the stage that amplifies it
Filter4 poles, 24 dB/oct, resonance up to self-oscillation
AmplifierLinear control law, odd-order compression, the offset thump
Envelope1 ADSR with capacitor behaviour (decay aims at the sustain, release starts from the instantaneous level), shared by filter and amplifier
LFO1, 4 shapes from the panel; it is also the clock for arpeggiator and sequencer
Sequencer100 steps, 2 banks, rests and ties, live transposition
ArpeggiatorUp, up and down, down, with hold
Memory100 factory patches, rewritable; the sequence is part of the patch
Parameters101 exposed to automation
FormatsVST3 and standalone application, Windows 64-bit

In short

A small instrument, modelled seriously.

One oscillator, 3 sub modes, a 4-pole filter to self-oscillation, an amplifier with its own compression, and 100 steps that belong to the patch.

The other instruments

Downloads

Try Line101

Each download is the Windows installer, a single .msi file. It installs for all users, so Windows asks for administrator rights; under each release there is also the .exe installer, inside a ZIP.

Line101

Line101

Modelled at the level of the circuit

Not a row of blocks with the right names on them. The oscillator has its dead time, the filter keeps its bass under resonance, the amplifier compresses and thumps: behaviours that are inconvenient on paper, and the reason the instrument is recognised in two notes.

Read about this instrument

All installers