Five cells, and a chassis
Every compressor has to answer one question: what actually reduces the gain? In Zygos the answer is a part, and you choose which one. There are five, plus a plain linear cell, the default, for when you want no character at all.
The five
An optical cell: a lamp and a photoresistor, slow to start, slower to let go, and from the first few dB of reduction on, the harder it works the LESS it distorts. A remote-cutoff valve: soft, mostly odd harmonics, a good one to try on a mix bus. A JFET: no lag of its own, and dirtier the harder it works. A diode bridge, the aggressive one. And a VCA, the clean one, with only a trace of distortion, and only at very low levels.
Choosing a cell is not choosing a preset. Threshold and ratio still decide how much reduction you ask for; the cell decides what your sound goes through while it is reduced: how much it distorts, and how that changes as the reduction grows. The opto also decides how slowly it lets go.
The machine around the cell
Around the cell sits a chassis, and it changes the result too. The power supply sags when the compressor pulls on it: ask for 10 dB of reduction at 2:1 on a stereo track and the factory supply gives you about 9.3 dB, a weak one about 8.2 dB. Over a few minutes the unit warms up and the cells drift a little. An optional transformer stage, Iron In and Iron Out, off at the factory, thickens the low end when you push it. Set the supply to zero impedance and the drift to zero and the reduction follows your settings to the letter; leave them on and the compressor feels the load.
The cells live in a shared library, not inside Zygos, and that is on purpose: they are meant as the base for vintage-style models later. The values that shape each cell are physical parameters with names, so a clone, if we build one, would mostly be a new set of values, not a new curve drawn to match a recording.
The instrument