Skip to content
IkonaBIT Instruments written by musicians, for musicians. Sign in

Limiter

Telos Lite

Telos Lite

Telos Lite is the FREE edition of Telos: the same true-peak limiter and the same guarantee on the ceiling, reduced to GAIN, CEILING, RELEASE and TRUE PEAK. The reduction is in the controls, not in the quality: lookahead, detection factor, style and the rest are fixed at the factory values of the full edition.

v1.0.1

Available forVST3 · StandaloneVST3 · Standalone
Telos Lite
Everything you need to set a ceiling.

betadownload and try

Download the betaSign up

In beta, and you try all of it

This is not a cut-down version: it is the complete instrument. We are asking you to use it and tell us what does not add up.

— 10 clean minutes at every launch — then 3 seconds of noise every 3 minutes — nothing disabled, no preset locked; offline renders (bounce, export, freeze) are always degraded — beta and stable builds follow the same rule

3 seconds at −18 dBFS · the clock restarts at every launch

v1.0.1

Available forVST3 · StandaloneVST3 · Standalone

FREE forever: no purchase, no time limit. To unlock it you need an account: get your FREE licence there, enter your computer's machine code and you receive the licence file for that computer. Until then the plugin runs in demo mode, like every ikonaDSP plugin. Both formats included.

Reduced in controls, not in quality.

Telos Lite is built from the same source files as Telos, compiled with a different switch. What the full edition lets you adjust is fixed here at its defaults, which are also its Init preset: the basic behaviour of the limiter, with the ceiling, the gain and the release in your hands.

The four controls

Everything you need to set a ceiling.

Four controls, and the bypass in the bar.

GAIN and CEILING

GAIN pushes the input, 0 … +24 dB: how much you raise the level is how much you ask the limiter to take. CEILING, -12 … 0 dBTP, is the ceiling; -1 dBTP at the factory values.

RELEASE

10 ms … 2 s on a logarithmic scale. Release is automatic and always on, so the knob sets the time of the slow stage, to 90 % of the recovery; the fast stage runs at the Balanced time, 60 ms.

TRUE PEAK

On, the detector estimates the peak between samples at 4x and the ceiling is in dBTP. Off, it looks at samples only: cheaper, 32 samples less latency, and the ceiling is written in dBFS because it holds on samples.

Who it is for

For a safe ceiling, not for a laboratory.

Most limiting on a master is asked to do one thing: stop the signal crossing a line. That needs a good detector and three knobs.

Delivery

A ceiling in dBTP, -1 dBTP at the factory values, which leaves room for lossy codecs. 8 factory presets built on what this edition actually does: transparent and punchy masters, streaming and broadcast delivery, hard drums, safe vocals.

FREE, with no catch

No time limit. Get your FREE licence in your account and activate it with your computer's machine code. User presets can be saved and opened as in the full edition.

A way up

A session saved with Telos opens in Telos Lite, which ignores the controls it does not have. Going the other way loses nothing.

What the full Telos adds

The same limiter, with more to adjust.

Telos shares this edition's limiter, its guarantee on the ceiling and A | B, and adds the following. It runs in trial until a licence file is activated: the first 10 minutes of each session are clean, then a 3-second noise burst at -18 dBFS every 3 minutes, and offline renders are degraded.

Adjustable lookahead

0.5 … 5 ms, instead of the fixed 2 ms. A longer lookahead descends more gently and distorts less on the lows.

Detection factor

2x, 4x or 8x, instead of the fixed 4x.

Four styles and manual release

Transp, Balanced, Punchy and Loud, and a release that can be taken out of AUTO.

Stereo link and output trim

Link 0 … 100 % and a trim of -12 … 0 dB after the limiter.

Dither and noise shaping

16 or 24 bit, TPDF, with optional noise shaping.

A loudness meter

Momentary, short-term and integrated, and the true peak held, to ITU-R BS.1770-4 / EBU R128. 20 factory presets in all.

The detector

True peak, from a single switch.

With TRUE PEAK on, the detector estimates the peak between samples with a polyphase interpolator at 4x - 2x at 176.4 and 192 kHz - and the ceiling holds there as well. Against an independent 16x reference the overshoot measured +0.042 dB at 4x: a measurement, not a guarantee. The audio itself never passes through an oversampling filter.

  • Peak estimated between samples, at 4x, in the detector only
  • Ceiling in dBTP; in dBFS when TRUE PEAK is off
  • Latency 128 samples at 48 kHz with TRUE PEAK on, 96 with it off
True peak, from a single switch.

What was left out

No lookahead dial, no dither, no meter. The limiter stays.

Lookahead is fixed at 2 ms, detection at 4x, the style at Balanced, release automatic, stereo link 100 % and the output at 0 dB: the defaults of Telos. There is no dither, no noise shaping and no loudness meter, no sidechain input, and mono and stereo only. The panel does not show what would not sound. A host lists all 13 parameters of Telos, including 8 that do nothing here: they are there so that sessions move between the two editions, and moving them changes nothing.

The panel

Three knobs and a switch.

The same top bar as the full edition - presets with arrows, A | B, BYPASS, OPTIONS - and the same level display: output in colour over the input, gain reduction in red from the top, the ceiling as a dashed line. Under it the IN, GR and OUT meters and three boxes: LEVEL, ENVELOPE, DETECTION. The panel is 1200 x 580, scalable from 50 % to 200 %. The OPTIONS menu has the entries common to the line and the peak hold of the meters.

  • A | B: two complete copies of the sound parameters, saved with the session
  • Declared latency equals spent latency, bypass included: the dry signal is delayed by the same amount, so switching neither shifts time nor clicks
  • User presets share the folder used by Telos
Three knobs and a switch.

What is measured

Same guarantee, same latency rule.

Latency is declared and spent: 128 samples at 48 kHz (2.67 ms) with TRUE PEAK on, 96 with it off, whatever the block size. The bypass delays the dry signal by the same amount, so switching does not shift time and does not click.

128samples at 48 kHz, declared and spent
8factory presets, a bank of their own
4controls, plus the bypass
8presets in the anti-regression net

The anti-regression net measures all 8 presets on the real processor against a fingerprint on file, and a separate test moves the 8 inactive parameters and checks that the output is identical bit for bit and the declared latency unchanged.

Declared limits: there is no hold stage, so with a fast release the gain follows the individual half-cycles of a bass and distorts it. With the lookahead fixed at 2 ms the Lite cannot lengthen it as Telos does: for bass and sub use releases of 300 ms or more, or the full edition. With TRUE PEAK off the ceiling holds on samples only.

Specifications

TypeLimiter with lookahead and true-peak detection; mono or stereo
ControlsGAIN 0 … +24 dB, CEILING -12 … 0 dBTP, RELEASE 10 ms … 2 s, TRUE PEAK
Fixed valuesLookahead 2 ms, 4x detection, Balanced style, automatic release, stereo link 100 %, output 0 dB, dither off
LoudnessNot included
Latency128 samples at 48 kHz (2.67 ms) with TRUE PEAK on, 96 with it off; declared and spent, in bypass too
ParametersThe 13 of Telos, same identifiers; five act: GAIN, CEILING, RELEASE, TRUE PEAK and bypass
ComparisonA | B, saved with the session
Presets8 factory presets, a bank of their own, also exposed as host programs, plus user presets on file
Panel1200 x 580, scalable from 50 % to 200 %
LicenceFREE and perpetual: licence file from your account, tied to your computer
FormatsVST3 and standalone on Windows 64-bit and macOS; AVX2 not required; no sidechain input

In short

The limiter you can leave on the master.

4 controls, true-peak detection and a declared latency, in the FREE edition. When you need the lookahead, the styles, dither and the loudness meter, Telos has them.

The other instruments

Downloads

Try Telos Lite

Windows downloads are installers (.msi, or the .exe inside a ZIP); macOS downloads are .pkg installers.

Telos Lite

Telos Lite

True-peak limiter, four controls

Telos Lite is the FREE edition of Telos: the same true-peak limiter and the same guarantee on the ceiling, reduced to GAIN, CEILING, RELEASE and TRUE PEAK. The reduction is in the controls, not in the quality: lookahead, detection factor, style and the rest are fixed at the factory values of the full edition.

Read about this instrument

All installers