Channel strip
StripL Lite
StripL Lite
The filters, the four-band EQ and the compressor of StripL, with the same precision, on a panel of 1150 × 482 pixels. The input stage, the expander and gate and the module order stay with the full edition. 25 factory presets are included, and your own can be saved as files.
v0.2.1
betadownload and try
In beta, and you try all of it
This is not a cut-down version: it is the complete instrument. We are asking you to use it and tell us what does not add up.
3 seconds at −18 dBFS · the clock restarts at every launch
v0.2.1
FREE forever: no purchase, no time limit. To unlock it you need an account: get your FREE licence there, enter your computer's machine code and you receive the licence file for that computer, with up to 2 computers per licence. Until then the plugin runs in demo mode, like every ikonaDSP plugin: 10 minutes clean, then a 3-second noise burst every 3 minutes. Both formats included.
The same filters and EQ. Nothing is cut from the sound.
The reduction is in capabilities, not in quality: the Lite is built from the same source as StripL with a build switch. The high-pass is 18 dB per octave, the low-pass 12 dB per octave, and the EQ is the same four bands, fixed on the BRN character.
What it keeps
A strip with fewer decisions to make.
What is left out are the controls that ask you to know what you are doing; what stays is the part that shapes the sound.
Filters
High-pass from 16 to 350 Hz and low-pass from 3 to 22 kHz, each out of circuit at the end of its travel.
VCA compressor
Threshold, a ratio up to infinity, a release of 100 ms–4 s and MAKEUP from -12 to +24 dB after the dynamics.
Four-band EQ
LF and HF shelves that switch to bells, LMF and HMF bells with their own Q, and the curve drawn above the knobs. The Lite uses the BRN character: wide, soft bells, with up to 15 dB per band.
Who it is for
For a strip you can learn in a minute.
Four modules in a row are enough when the question is how much, not in which order.
Quick shaping
Cut the lows, set the EQ, add some compression and ride the fader. Everything is on one row.
A bank to start from
25 factory presets in 9 categories, and your own saved as files, shared with StripL.
A way up
The saved state uses the same 40 identifiers as StripL, so a session opens in both editions.
What StripL adds
The same strip, with the whole console channel.
StripL shares this edition's filters, EQ bands, compressor, preset bank and parameter identifiers, and adds the following. Both have the same fixed latency.
Input stage
Line gain, mic gain up to 60 dB, polarity inversion, a 20 dB pad and the transformer with its even harmonics.
Expander and gate
Threshold, range and release, on the same VCA as the compressor.
Module order
FLIP, PRE DYN and DYN SC, and LINK for stereo.
Compressor modes
FAST attack and AUTO release.
The second EQ character
BLK, with the full Q, sharper shelves and up to 18 dB per band.
41 presets
Instead of 25: the Lite bank is the part of the full bank that names only controls the Lite has.
Sessions move across
A StripL session opened in the Lite keeps the values of the controls the Lite does not have and ignores them, so the full edition finds them again.
Filters and compressor
Two modules, side by side.
The high-pass and the low-pass sit on the left, then the compressor: THRESH from -20 to +10 dB, RATIO from 1 to infinity, RELEASE 100 ms–4 s, and MAKEUP from -12 to +24 dB. The gain-reduction meter lights from 1 to 20 dB. The attack is fixed at 3 ms; FAST and AUTO belong to the full edition.
- High-pass 18 dB per octave, low-pass 12 dB per octave
- CMP IN and EQ IN switch each module in and out
- With the compressor off and makeup at 0 dB, the dynamics leave the signal path
The equaliser
Four bands, on the BRN character.
LF (30–450 Hz) and HF (1.5–16 kHz) are shelves that switch to bells with BELL; LMF (200–2500 Hz) and HMF (600–7000 Hz) are bells with a Q from 0.5 to 5. The knobs are marked plus or minus 18 dB, and the BRN character limits each band to 15 dB: BLK, which reaches 18, is in the full edition. The curve of the whole EQ is drawn above the knobs.
What is measured
Fixed latency, and a preset bar that does not click.
Latency is 31 samples, declared once to the host and unchanged in bypass. Loading a preset crossfades over 6 ms, so changing preset on running audio leaves no step.
The host lists all 40 parameters, and 17 of them do nothing in this edition: they stay in the saved state with the same identifiers, so a session opens in both editions. The factory presets are technical starting points, not tuned by ear, and a preset that names a control the Lite does not have is not in the Lite bank.
Specifications
In short
The strip, without the studying.
Filters, a four-band EQ and a VCA compressor, 25 presets and 31 samples of fixed latency. That is the FREE edition.
Downloads
Try StripL Lite
Each download is the Windows installer, a single .msi file. It installs for all users, so Windows asks for administrator rights; under each release there is also the .exe installer, inside a ZIP.

StripL Lite
The strip's filters, EQ and compressor, FREE
The filters, the four-band EQ and the compressor of StripL, with the same precision, on a panel of 1150 × 482 pixels. The input stage, the expander and gate and the module order stay with the full edition. 25 factory presets are included, and your own can be saved as files.
ikonabit-StripLLite-0.2.2 beta
VST3Standalone
File names
- ikonabit-StripLLite-0.2.2.msi
ikonabit-StripLLite-0.2.1 beta
VST3Standalone
File names and previous versions (1)
- ikonabit-StripLLite-0.2.1.msi
ikonabit-StripLLite-0.2.0 beta
VST3Standalone