Skip to content
IkonaBIT Instruments written by musicians, for musicians. Sign in

Memo18 2026 · W43 3 min

Memo18: eighteen oscillators, no two alike

Memo18 is a six-voice polysynth that recreates the workings of an analogue circuit, with three oscillators on every voice. Hold a chord and listen: eighteen oscillators, none sitting exactly where its neighbour does, so the chord breathes instead of standing still.

Eighteen oscillators, no two alike

Every oscillator has its own small tuning difference, fixed and different from the others: around three hundredths of a semitone. It doesn’t change from one launch to the next: the same program, on the same version, sounds identical. But no oscillator sits where the next one does, and that is what separates a chord from a stack of identical copies.

Three waveshapes, all at once

Saw, triangle and pulse are on every oscillator at the same time, with no selector: switch on the ones you want and they add up. One voice can feed nine sources into its mixer, and the mixer clips: two saws starting together, at high level, already reach its ceiling. So how many shapes you switch on, and how loud, becomes a tone control. The pulse width runs from 2 % to 98 %. Oscillator 2 syncs to oscillator 1, and oscillator 3 can leave the keyboard and act as a modulator.

A filter that sings

Four poles (24 dB per octave), with keyboard tracking, which makes the cutoff follow the notes you play, in four positions: off, one third, two thirds, full. Push EMPHASIS all the way: the filter stops filtering and starts singing on its own, an almost pure tone.

Twelve envelopes

Each voice has two ADSR envelopes: one for the filter and one for the amplifier. Attack runs from 1 ms to 10 s, decay and release from 2 ms to 20 s: from a sharp snap to a sound that slowly swells. Three switches change how they behave: RETURN TO ZERO decides whether a re-struck note starts again from silence, UNCONDITIONAL CONTOUR carries every attack through even if you barely brush the key, and KEYBOARD FOLLOW shortens all the times as you climb.

Playing it

  • POLY with four ways of handing notes to the voices, or MONO with one to six voices stacked on the same note: up to eighteen oscillators on a single key.
  • HOLD keeps a chord in memory in POLY mode and transposes it from the last note you play.
  • Nine arpeggiator modes, running to the LFO or to your DAW’s tempo. Every arpeggio note keeps its own voice and its own tuning: it isn’t one voice repeating.
  • 100 factory programs, twenty of them built around sync, and you can rewrite any of them. The whole bank saves as a single .m18bank file.
  • A 61-key keyboard, pitch and modulation wheels, two expression pedals (MIDI CC 4 and CC 11) and five switch pedals.

Use it as a VST3 or as a standalone program; it needs a processor with AVX2 instructions, without which it stays silent. Load program 0, hold a six-note chord and open EMPHASIS slowly: hear where the filter takes you.

The Memo18 panel: program controls on the left, modulation and the three oscillators in the middle, filter and amplifier on the right, 61 keys below.
The Memo18 panel: program controls on the left, modulation and the three oscillators in the middle, filter and amplifier on the right, 61 keys below.
The three oscillators of a voice: octave, pulse width and the three waveshapes, each with its own switch and its own level in the mixer.
The three oscillators of a voice: octave, pulse width and the three waveshapes, each with its own switch and its own level in the mixer.
Filter and envelopes: cutoff, EMPHASIS, contour amount and the two envelopes with their three switches.
Filter and envelopes: cutoff, EMPHASIS, contour amount and the two envelopes with their three switches.

Hear how Memo18 sounds