Skip to content
IkonaBIT Instruments written by musicians, for musicians. Sign in

Channel strip

StripL Lite

StripL Lite

The filters, the four-band EQ and the compressor of StripL, with the same precision, on a panel of 1150 × 482 pixels. The input stage, the expander and gate and the module order stay with the full edition. 25 factory presets are included, and your own can be saved as files.

v0.2.1

Available forVST3 · Standalone
StripL Lite
A strip with fewer decisions to make.

betadownload and try

Download the betaSign up

In beta, and you try all of it

This is not a cut-down version: it is the complete instrument. We are asking you to use it and tell us what does not add up.

— 10 clean minutes at every launch — then 3 seconds of noise every 3 minutes — nothing disabled, no preset locked; offline renders (bounce, export, freeze) are always degraded — beta and stable builds follow the same rule

3 seconds at −18 dBFS · the clock restarts at every launch

v0.2.1

Available forVST3 · Standalone

FREE forever: no purchase, no time limit. To unlock it you need an account: get your FREE licence there, enter your computer's machine code and you receive the licence file for that computer, with up to 2 computers per licence. Until then the plugin runs in demo mode, like every ikonaDSP plugin: 10 minutes clean, then a 3-second noise burst every 3 minutes. Both formats included.

The same filters and EQ. Nothing is cut from the sound.

The reduction is in capabilities, not in quality: the Lite is built from the same source as StripL with a build switch. The high-pass is 18 dB per octave, the low-pass 12 dB per octave, and the EQ is the same four bands, fixed on the BRN character.

What it keeps

A strip with fewer decisions to make.

What is left out are the controls that ask you to know what you are doing; what stays is the part that shapes the sound.

Filters

High-pass from 16 to 350 Hz and low-pass from 3 to 22 kHz, each out of circuit at the end of its travel.

VCA compressor

Threshold, a ratio up to infinity, a release of 100 ms–4 s and MAKEUP from -12 to +24 dB after the dynamics.

Four-band EQ

LF and HF shelves that switch to bells, LMF and HMF bells with their own Q, and the curve drawn above the knobs. The Lite uses the BRN character: wide, soft bells, with up to 15 dB per band.

Who it is for

For a strip you can learn in a minute.

Four modules in a row are enough when the question is how much, not in which order.

Quick shaping

Cut the lows, set the EQ, add some compression and ride the fader. Everything is on one row.

A bank to start from

25 factory presets in 9 categories, and your own saved as files, shared with StripL.

A way up

The saved state uses the same 40 identifiers as StripL, so a session opens in both editions.

What StripL adds

The same strip, with the whole console channel.

StripL shares this edition's filters, EQ bands, compressor, preset bank and parameter identifiers, and adds the following. Both have the same fixed latency.

Input stage

Line gain, mic gain up to 60 dB, polarity inversion, a 20 dB pad and the transformer with its even harmonics.

Expander and gate

Threshold, range and release, on the same VCA as the compressor.

Module order

FLIP, PRE DYN and DYN SC, and LINK for stereo.

Compressor modes

FAST attack and AUTO release.

The second EQ character

BLK, with the full Q, sharper shelves and up to 18 dB per band.

41 presets

Instead of 25: the Lite bank is the part of the full bank that names only controls the Lite has.

Sessions move across

A StripL session opened in the Lite keeps the values of the controls the Lite does not have and ignores them, so the full edition finds them again.

Filters and compressor

Two modules, side by side.

The high-pass and the low-pass sit on the left, then the compressor: THRESH from -20 to +10 dB, RATIO from 1 to infinity, RELEASE 100 ms–4 s, and MAKEUP from -12 to +24 dB. The gain-reduction meter lights from 1 to 20 dB. The attack is fixed at 3 ms; FAST and AUTO belong to the full edition.

  • High-pass 18 dB per octave, low-pass 12 dB per octave
  • CMP IN and EQ IN switch each module in and out
  • With the compressor off and makeup at 0 dB, the dynamics leave the signal path
Two modules, side by side.

The equaliser

Four bands, on the BRN character.

LF (30–450 Hz) and HF (1.5–16 kHz) are shelves that switch to bells with BELL; LMF (200–2500 Hz) and HMF (600–7000 Hz) are bells with a Q from 0.5 to 5. The knobs are marked plus or minus 18 dB, and the BRN character limits each band to 15 dB: BLK, which reaches 18, is in the full edition. The curve of the whole EQ is drawn above the knobs.

Four bands, on the BRN character.

What is measured

Fixed latency, and a preset bar that does not click.

Latency is 31 samples, declared once to the host and unchanged in bypass. Loading a preset crossfades over 6 ms, so changing preset on running audio leaves no step.

31samples of latency, constant, in bypass too
25factory presets in 9 categories
23parameters that act, of the 40 offered to the host
18/12dB per octave, high-pass and low-pass

The host lists all 40 parameters, and 17 of them do nothing in this edition: they stay in the saved state with the same identifiers, so a session opens in both editions. The factory presets are technical starting points, not tuned by ear, and a preset that names a control the Lite does not have is not in the Lite bank.

Specifications

TypeChannel strip: filters, compressor, four-band EQ, output
FiltersHigh-pass 18 dB per octave, 16 to 350 Hz; low-pass 12 dB per octave, 3 to 22 kHz; each out of circuit at the end of travel
CompressorVCA, threshold -20 to +10 dB, ratio 1:1 to infinity, release 100 ms–4 s, attack 3 ms, 6 dB soft knee, makeup -12 to +24 dB after the dynamics
EQFour bands, minimum phase: LF 30–450 Hz, LMF 200–2500 Hz, HMF 600–7000 Hz, HF 1.5–16 kHz; character BRN, limited to plus or minus 15 dB per band; Q 0.5 to 5 on LMF and HMF; LF and HF shelf or bell
Output and metersFader -80 to +12 dB, output plus or minus 24 dB; LED meter with peak hold, gain-reduction meter, CPU meter
Not in this editionInput stage with transformer, expander and gate, FLIP, PRE DYN, DYN SC, LINK, FAST and AUTO, the BLK character
Latency31 samples, constant, in bypass too
ParametersAll 40 offered to the host; 23 act on the sound, 17 are kept in the state and ignored
Presets25 factory presets in 9 categories, plus user presets as .stripl files
Panel1150 × 482, resizable from 640 to 3300 px wide
LicenceFREE and perpetual: licence file from your account, tied to your computer, up to 2 computers
FormatsVST3 and standalone, Windows 64-bit; mono to mono, stereo to stereo, mono to stereo

In short

The strip, without the studying.

Filters, a four-band EQ and a VCA compressor, 25 presets and 31 samples of fixed latency. That is the FREE edition.

The other instruments

Downloads

Try StripL Lite

Each download is the Windows installer, a single .msi file. It installs for all users, so Windows asks for administrator rights; under each release there is also the .exe installer, inside a ZIP.

StripL Lite

StripL Lite

The strip's filters, EQ and compressor, FREE

The filters, the four-band EQ and the compressor of StripL, with the same precision, on a panel of 1150 × 482 pixels. The input stage, the expander and gate and the module order stay with the full edition. 25 factory presets are included, and your own can be saved as files.

Read about this instrument

All installers